Vandlgard Nut Oversize, Zinc
Products > Nuts > Vandlgard Nut Oversize, Zinc
More about this item
Description
Features
Tech Specs
A low torque, frangible (break-a-way) nut, installed with a standard wrench and removed by authorized persons by a special procedure. Intended for mounting traffic signs with galvanized bolts. Available only in 5/16-18 (modified oversize) thread size to accommodate a galvanized bolt.
Wrenching Element Breaks Off At Predetermind Torque
Can't be removed with standard hand tools. Tightness is not determined by judgment of installer.
Threaded Portion Is Tapered
Can't be gripped with pliers and has attrative finish.
Die Cast From Zinc Alloy
No corrosion at break-groove.
.015" Oversive Threads
Assembles with hot dipped galvanized bolts.
Reduced Break-Off Torque
Lowers clamp load to avoid damage to parts being assembled.
Nuts are Packed in Bags of 100
Better inventory control.
Lot Number on Each Bag of Nuts
Traceable to raw material.
Can't be removed with standard hand tools. Tightness is not determined by judgment of installer.
Threaded Portion Is Tapered
Can't be gripped with pliers and has attrative finish.
Die Cast From Zinc Alloy
No corrosion at break-groove.
.015" Oversive Threads
Assembles with hot dipped galvanized bolts.
Reduced Break-Off Torque
Lowers clamp load to avoid damage to parts being assembled.
Nuts are Packed in Bags of 100
Better inventory control.
Lot Number on Each Bag of Nuts
Traceable to raw material.
Material: Zinc die cast
Finish: Natural
Diameter: 5/16-18
.015" Tapped Oversize
Torque (Breakoff)
Low
Finish: Natural
Diameter: 5/16-18
.015" Tapped Oversize
Torque (Breakoff)
Low