Questions? Contact Us
phone_android
1 (800) 959-8256

Products  Tools

Heavy Duty Air Pneumatic Rivet Tool
3-Jaw Design Air Pressure 70-90 psi 2697 lbs. pulling power Blind Rivets from 5/32" to 1/4" in all materials
• Heavy Duty Air Pneumatic Rivet Tool
SKU: VCT297 - GET MORE DETAILS
Air Pneumatic Rivet Tool
3-Jaw Design Air Pressure 70-90 psi 1910 lbs. pulling power Blind Rivets from 3/32" to 3/16" in all materials
• Air Pneumatic Rivet Tool
SKU: VCT296 - GET MORE DETAILS
Heavy Duty Air Pneumatic Rivet Tool
3-Jaw Design Air Pressure 70-90 psi 2697 lbs. pulling power Blind Rivets from 5/32" to 1/4" in all materials
• Heavy Duty Pneumatic Rivet Tool
SKU: VCT298 - GET MORE DETAILS
SIMIFAST Magnet
A small magnet used to help determine material identification
• SIMIFAST Magnet
SKU: VCT322 - GET MORE DETAILS
Magnetic Nutsetter
Hex Driver used to install any hex head bolt or hex nut
• 3/8 Magnetic Nutsetter
• 1/2 Magnetic Nutsetter
• 9/16 Magnetic Nutsetter
• Magnetic Nutsetter
SKU: VCT327 - GET MORE DETAILS
Short Arm Hex Key Drilled
A Short Arm Hex Key, drilled to accomodate a pinned hex recess.
• 5/32 Short Arm Hex Key Drilled
• 3/16 Short Arm Hex Key Drilled
• 7/32 Short Arm Hex Key Drilled
• 5/32 Short Arm Hex Key Drilled
• 3/16 Short Arm Hex Key Drilled
SKU: VCT178 - GET MORE DETAILS
Hex Bit Drilled
Hex driver bit drilled to accommodate a pinned hex recess screw.
• 5/32 Hex Bit Drilled
• 3/16 Hex Bit Drilled
SKU: VCT180 - GET MORE DETAILS
Short Arm Hex Key
A tool used on socket screws for installation.
• 5/32 Short Arm Hex Key
• 3/16 Short Arm Hex Key
• 7/32 Short Arm Hex Key
SKU: VCT182 - GET MORE DETAILS
Delineator T Wrench
A special tool to fit VCN175-3, -4 and -5 nuts.
• Delineator T Wrench
SKU: VCT191 - GET MORE DETAILS
Stamped Steel Tool for Delineator Bolt
Optional driver for the VCB196 Spanner Bolt.
• Driver, Stamped Steel
SKU: VCT198 - GET MORE DETAILS
T-Handle Tool for Delineator Bolt
Optional driver for the VCB196 Spanner Bolt.
• Driver, T Handle
SKU: VCT199 - GET MORE DETAILS
12 Point Wrench
Internal Twelve Point Drive to wrench a VCB205 Bolt
• 12 Point Wrench
SKU: VCT205 - GET MORE DETAILS
Woodsert Driver Shank
Installation Tool for VCN152 Woodsert with blades to rotate the woodsert and a protruding pin to maintain perpindicularity.
• Woodsert Driver Shank
SKU: VCT206 - GET MORE DETAILS
One Way Removal Tool
A special screwdriver with two tungsten carbide tips mounted at a back angle to engage the sloping surfaces of a one way recess to remove the screw quickly and non-destructively.
• One Way Removal Tool
SKU: VCT238 - GET MORE DETAILS
Banding Tool
A heavy duty tool used to crimp and cut the banding and buckle to round or cylindrical structures.
• Banding Tool
SKU: VCT270 - GET MORE DETAILS
Tri-Groove Socket
A hardened heat treated socket used to install a Tri-Groove Nut when tamper resistant requirements are necessary.
• #20 Tri-Groove Socket
• #30 Tri-Groove Nut
SKU: VCT272 - GET MORE DETAILS
Pro-Riveter Hand Rivet Tool
A heavy duty tool used to set blind rivets.
• Pro-Riveter Hand Rivet Tool
SKU: VCT273 - GET MORE DETAILS
T-Handle Wrench
A T-Handle Wrench Used to secure tamper resistant bolts and screws where greater gripping and torque levels are required.
• 5/32 T-Handle Wrench
• 3/16 T-Handle Wrench
SKU: VCT274 - GET MORE DETAILS
Nut and Bolt Gauge
Excellent for sizing bolts, screws, nuts (USS, SAE, and Metric) and twist drills Size bolt diameter by pushing bolt through sizing holes Gauges hex nuts and washers (USS, SAE) Gauges metric hex nuts and washers by holding under metric holes
• Nut and Bolt Gauge
SKU: VCT285 - GET MORE DETAILS
Big Daddy Hand Rivet Gun
Industrial Rivet Tool.
• Big Daddy Hand Rivet Gun
SKU: VCT295 - GET MORE DETAILS
Steel Tie Tension Tool
The lightweight tool controls tension and cutoff by squeezing its handle. It cuts close to head to ensure no sharp edges protrude.
• Steel Tie Tension Tool
SKU: VCT317 - GET MORE DETAILS

Contact Us

SIMIFAST, Inc
4615-1P INDUSTRIAL ST.
Simi Valley, , CA , 93063
PH: (805) 581-2400
FX: (805) 581-9162
TF: 1 (800) 959-8256
Email: sales@simifast.com